高级检索
    徐伟,铁永波,郑玄,等,2024. 凉山州地质灾害发育特征与时空分布规律[J]. 沉积与特提斯地质,44(3):478−492. DOI: 10.19826/j.cnki.1009-3850.2023.11002
    引用本文: 徐伟,铁永波,郑玄,等,2024. 凉山州地质灾害发育特征与时空分布规律[J]. 沉积与特提斯地质,44(3):478−492. DOI: 10.19826/j.cnki.1009-3850.2023.11002
    XU W,TIE Y B,ZHENG X,et al.,2024. Development characteristics and temporal-spatial distribution of geological hazards in Liangshan Prefecture[J]. Sedimentary Geology and Tethyan Geology,44(3):478−492. DOI: 10.19826/j.cnki.1009-3850.2023.11002
    Citation: XU W,TIE Y B,ZHENG X,et al.,2024. Development characteristics and temporal-spatial distribution of geological hazards in Liangshan Prefecture[J]. Sedimentary Geology and Tethyan Geology,44(3):478−492. DOI: 10.19826/j.cnki.1009-3850.2023.11002

    凉山州地质灾害发育特征与时空分布规律

    Development characteristics and temporal-spatial distribution of geological hazards in Liangshan Prefecture

    • 摘要: 凉山州地处横断山系东北缘、川滇构造带南段,受活动构造、地形地貌、河流切割等作用影响,发育有地质灾害总数4016处,以中、小型土质滑坡和中、小型沟谷泥石流为主,是四川省地质灾害高风险地区。本文采用资料收集、数理统计、ArcGIS软件分析等方法分析发现,按行政区分析,德昌县是地质灾害发育数量最多的县市,为387处;宁南县是灾害发育密度最高的县市,为17.7处/100 km2;按流域分析,安宁河流域的地质灾害数量最多,达779处;美姑河流域的灾害发育密度最高,达11.18处/100 km2。以灾害发育密度为指标对不同灾害类型地质灾害的空间分布进行分析,滑坡方面,划分为4个极高密度区和15个高密度区,滑坡发育受活动构造、易滑地层(红层、昔格达组等)控制作用影响较大;崩塌方面,划分为2个极高密度区和5个高密度区,崩塌沿河谷及支沟、活动构造呈带状分布,受水电站库区开发建设、公路建设等工程活动切坡影响较大;泥石流方面,划分为2个极高密度区和10个高密度区,泥石流发育受构造断裂、地形地貌和人类工程活动影响较大。研究成果可为凉山州的防灾减灾工作提供数据支撑和科学参考。

       

      Abstract: Liangshan Prefecture is located in the northeastern margin of the Hengduan Mountain system and in the southern section of the Sichuan-Yunnan tectonic belt. Due to active structure, landforms, river cutting, etc., there are 4016 occurrences of geological disasters in Liangshan Prefecture, mainly small and medium-sized soil landslides, and small and medium-sized gully debris flows. Liangshan Prefecture is a high-risk area of geological disaster in Sichuan Province. This paper uses data collection, mathematical statistics, ArcGIS software analysis, and other methods to analyze and find that, according to the analysis of administrative region, Dechang County has the highest number of geological disaster developments, with a total of 387 occurrences. Ningnan County has the highest density of disasters development, with 17.7 sites per 100 km2. According to the analysis of river basins, the number of geological disasters in the Anning River Basin is the largest, reaching 779. The Meigu River Basin has the highest density of hazard development, with 11.18 places per 100 km2. In this paper, the spatial distribution of geological hazards of different disaster types is analyzed with disaster development density as the index. For landslides, 4 extremely high-density areas and 15 high-density areas are classified. The development of landslide is mainly controlled by active structures and slippery strata (such as red beds, Xigeda formation, etc.). For collapses, 2 extremely high-density areas and 5 high density areas are classified. The collapses are distributed along valleys and tributary channels in a zonal pattern, greatly influenced by slope cutting activities related to hydropower reservoir development and highway construction. For debris flows, 2 extremely high-density areas and 10 high-density areas are classified. The development of debris flows is greatly impacted by structural fractures, landforms and human engineering activities. The research results can provide data support and scientific references for disaster prevention and mitigation in Liangshan Prefecture.

       

    /

    返回文章
    返回